Megapoxy Adhesives and Epoxies Product Guide

With some companies, their name says it all about what they do. But that’s not the case with Megapoxy. Although they do offer epoxies and adhesives as their main and most popular products, that’s not all they do. The Australian brand also supplies resins and coatings, and it has been in the industry for more than 50 years. Owned by Vivacity Engineering, the New South Wales company specialises in high-performance solutions for both everyday DIY tasks and large-scale construction jobs across Australia and globally. You can also find their products in South America, Europe, the Middle East, New Zealand and the Asia-Pacific region.

Adhesive Products

Megapoxy 34
source: emporiummarble.wordpress.com

63

The 63 is a high-strength, epoxy-based gel adhesive, ideal for filling gaps and bonding in tight spaces. It’s translucent with a compressive strength of 120 MPa and a cure time that goes past 24 hours. This Megapoxy adhesive is a low VOC product that spreads easily and has good resistance to yellowing.

69

Similar to the 63, the 69 is also a high-strength, non-sag, epoxy adhesive gel usable for both filling and bonding surfaces. However, this two-part solution stands out for its bond strength and durability, making it particularly suitable for overhead and angled applications. It can withstand much harsher conditions than the 63 adhesive.

84

With the 84 adhesive, you get a two-component epoxy paste meant for sticking ceramic tile linings to steel or concrete. It has a compressive strength of 120 MPa and a flexural strength of 55 MPa. Its operating temperature range starts from 10°C and goes up to 120°C. 

PM

The PM epoxy paste adhesive is a product for civil engineering applications, as it has easy 1:1 mixing and high chemical resistance. It’s meant for vertical, overhead and inclined work, and it can cure in quite adverse conditions. The PM is meant for general-purpose use, as well as for the bonding of most construction materials. 

PF

Used as a rapid-set epoxy paste, the PF has a cure time of 7 minutes and, thanks to its non-sag and simple mixing ratio of 1:1, it’s ideal for critical repairs that need to be done quickly. The PF makes for high-strength bonds with excellent chemical resistance. Like any of the above solutions, it can also be used for vertical, inclined and overhead projects.

HT

The HT can be applied in thick films, and its hydrophilic properties make it suitable for use in damp environments. This two-part solution is meant for high-build overhead and vertical applications, while it can be applied by brushing, trowelling, knifing and spraying on both vertical and inclined surfaces.

P1

Like the PF, the P1 also has a 1:1 mix ratio and is a two-part solution. However, the P1 is a low VOC adhesive and filler that can make high-strength permanent bonds. It can be used even in sewage systems and potable water systems, as the P1 comes in the form of a paste which, once cured, has a compressive strength of 80 MPa and tensile strength of 45 MPa.

Epoxy Products

MegaPoxy Crusher Backing
source: auscbgroup.com.au

108

Available in both 6 and 18 litre kits, the 108 provides a high-strength bonding solution for early-stage development projects. With a working time of 8 minutes and a compressive strength of 120 MPa, the 108 is able to cure in the presence of moisture, too. Its compressive strength goes up to 95 MPa after only 2 hours at a temperature of 22°C.

254

The 254 is a VOC-free, non-sag epoxy filler and adhesive paste used for bonding stone, grouting bolts, joining metal to metal or concrete, and repairing concrete columns and fibreglass articles. It also won’t stain or discolour light-coloured or white ceramics and marble. The recommended application temperature ranges from 10°C to 70°C.

132

Instead of an adhesive, 132 is an epoxy coating that is used to protect surfaces from porous substances. This high-strength solution is used in both industrial and commercial applications. It creates easy-to-clean, abrasion-resistant floors and is suitable for areas where food is handled and potable water is used. Common applications include catering kitchens, driveways and forklift ramps.

206 Ultra

The 206 Ultra is heavy-duty epoxy grout made of 100% solids, developed for applications requiring maximum strength. This solvent-free, two-component product is also safe for food and potable water applications, and it has an ultimate compressive strength of 118 MPa paired with a flexural strength of 75 MPa.

Crack Injection

Like a concrete sealer, a crack injection system helps protect concrete surfaces from further damage. However, rather than coating the surface, it works by filling and sealing cracks to repair damaged areas. Be it for commercial, industrial and civil sites, Megapoxy’s Crack Injection repair system offers it all, from surface reinforcement to deep structural bonding.

H

With extremely low VOC and low viscosity, this hydrophilic epoxy resin can be used in stone applications and in civil engineering. H resin offers high-strength sealing, anchoring and bonding, and it can be mixed with aggregate to create mortar systems.

Author: Michael Hobbs

Share This Post On